• 产品名称:
  • 功能名称:
  • 概要:



    The MAX706P/R/S/T, MAX706AP/AR/AS/AT, and MAX708R/S/T microprocessor (μP) supervisory circuits reduce the complexity and number of components required to monitor +3V power-supply levels in +3V to +5V μP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components.

    The MAX706P/R/S/T and MAX706AP/AR/AS/AT supervisory circuits provide the following four functions:
    1) A reset output during power-up, power-down, and brownout conditions.
    2) An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6s.
    3) A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than the main supply.
    4) An active-low, manual-reset input.
    The only difference between the MAX706R/AR, MAX706S/AS, and MAX706T/AT is the reset-threshold voltage levels, which are 2.63V, 2.93V, and 3.08V, respectively. All have active-low reset output signals. The MAX706P/AP are identical to the MAX706R/AR, except the reset output signal is active-high. The watchdog timer function for the MAX706AP/AR/AS/AT disables when the WDI input is left open or connected to a high-impedance state of a low-leakage tri-state output.

    The MAX708R/S/T provide the same functions as the MAX706R/S/T and MAX706AR/AS/AT except they do not have a watchdog timer. Instead, they provide both active-low RESET and RESET outputs. As with the MAX706, devices with R, S, and T suffixes have reset thresholds of 2.63V, 2.93V, and 3.08V, respectively.

    These devices are available in 8-pin SO, DIP, and μMAX® packages and are fully specified over the operating temperature range.


    • μMAX Package, Small 8-Pin SO
    • Precision Supply-Voltage Monitors
      • 2.63V (MAX706P/R, MAX706AP/AR, and MAX708R)
      • 2.93V (MAX706S, MAX706AS, and MAX708S)
      • 3.08V (MAX706T, MAX706AT, and MAX708T)
    • 200ms Reset Time Delay
    • Debounced TTL/CMOS-Compatible Manual Reset Input
    • 100μA Quiescent Current
    • WDI Disable Feature (MAX706AP/AR/AS/AT)
    • Watchdog Timer: 1.6s Timeout
    • Reset Output Signal:
      • Active-High Only (MAX706P, MAX706AP)
      • Active-Low Only (MAX706R/S/T, MAX706AR/AS/AT)
      • Active-High and Active-Low (MAX708R/S/T)
    • Voltage Monitor for Power-Fail or Low-Battery Warning
    • 8-Pin Surface-Mount Package
    • Guaranteed active-low RESET Assertion to VCC = 1V


    • 电池供电设备
    • 计算机
    • 控制器
    • 精确的μP电源监控
    • 智能仪表
    • 便携式仪表
  • 特征:

    • 监视电压、低成本微处理器
  • 技术资料下载:
黑龙江快乐十分官网 黑龙江快乐十分网 天天中彩票 天天中彩票 众享彩票官网 黑龙江快乐十分 黑龙江快乐十分 黑龙江快乐十分遗漏数据 黑龙江快乐十分官网 黑龙江快乐十分官方网站